The Care of your Yacht is essential for its wellness !
Work carried onboard Sunseeker 84’ Flying Sport!
Job List:
- Electrical System Review
- Mechanical maintenance
- Replacement of complete air conditioning system
- Replacement of lighting system including underwater system with closure of the hull holes
- Overhaul of the Tender Lift hydraulic system (stern platform)
Work carried onboard Azimut 62’S
Job List:
- Gealcoat painting of the sides – Polishing of the superstructures – Steel polishing
- Waterproofing the hull by replacing all the seals
- Mechanical Maintenance & Replacement of Turbine gaskets
- Propellers Balancing & Filling – PSS Seals Replacement – Guide Bushings Replacement – Bushings Replacement Foot
- Electrical maintenance from the starter motor to the electric winch motor
- Maintenance of hydraulic system Tender Lift (Immersion platform) + Flap.
- New upholstery on the outside and Interior upholstery Dinette Celini bulkheads and carpet.
Work carried onboard Azimut Magellano 53’
Job List:
- Replacement Frame around the stern platform in solid Teak + Light Polishing Teak Aft platform
Work carried onboard Joker Boat Clubman 26’
Job List:
- Complete tubular removal
- Complete polishing of the bare rubber boat
- New Tubulars with new Carboon Gray look – Double black fender – white interior
- New Smoked Windscreen
- New closed cell upholstery – shaded gray color
Work Carried onboard Conam 58′ Sport
Job List:
- Generator disembarkation – Generator reset
- Electrical system restoration
- Aft technical compartment recovery (electric and gelcoat)
- Ordinary Motors and Electrical Maintenance
Work carried onboard Mig 43′
Job List:
- Removal of teak decking from the stern platform to the cockpit
- Solid Teak Application Cornices + Slats + Black Coments – Complete walking from the platform to the cockpit
Work carried onboard Blu Martin 13,50′
Job List:
- Disembarkation of engines – generator – fuel tank – battery pack
- Refit Motors and Generators Only with original parts
- Propeller Balancing and Filling – Pss Seals Replacement – Axle Bushings Replacement
- Complete Change of All Seacocks
- Dashboard upholstery & T top
Work carried onboard Baglietto 16′ M
Wooden Yacht
Job List:
- Replacement Wood Opera Viva aft part & Straight of Stern
- Replacement of wheelhouse bushings
- Landing and Boarding of Fuel Tanks
- Periodic Inspection Certificate of Safety
- Repair of emergency fuel locking tie rods
- Overhaul of the engine room fire prevention system
Work carried onboard Tornado 38′ Flush Deck
Job List:
- Ordinary Motors and Electrical Maintenance
- Platform removal and stern platform application with new steel and resin
- Platform turn painting – Polishing of the dead work the blue of the sides and the white of the superstructure – Painting where necessary –
- White dashboard painting
- Creation of stern hatch for full access to the engine room with addition of hydraulic pump.
- Twisting for closing the anchor roller in steel and replacing the plastic pulley roller with steel pulley for hauling and launching the chain and adding a tip to facilitate falling again
Propspeed application
Work Carried onboard these yachts:
- Azimuth pod – 3 Ips 1050 – Azimuth 77 s
- Arneson – Mangusta 72 Surface Propellers
- Surface propellers Jolly drive – Rizzardi 45 S
- Surface Propellers – Baia 48 Flash
- Poppieri feet dph volvo penta – Fiart 42 ‘Genius
- Shaftline – Conam 46 ‘sport
- Shaft line – Alalunga 72 Flybridge
Work carried onboard Squalo 40′
Wooden Yacht
Job List:
- Wooden transom mirror restoration
- Engines landing
Work carried onboard Fiart 4seven
Job List:
- Complete Polishing Work Dead Walled & Superstructure
- Zero hull
- Ordinary mechanical and electrical maintenance
- Pod Transmission Revision with addition of oversized pump and more clutches.
- Replacement of Air Conditioning System